Column joint hardware - List of Manufacturers, Suppliers, Companies and Products

Column joint hardware Product List

1～10 item / All 10 items

Displayed results
Column connection hardware "Column mounting plate"

Column connection hardware "Column mounting plate"

Introduction of column connection hardware for the joints between the sides of columns and horizontal members, as well as between beams and roof supports!

The "Column Mounting Plate" is used for the connection between the column in the middle passage and the side of the horizontal members, as well as the connection between the beam and the roof supports. Align the main body with the joint between the column and the side of the horizontal members. Please secure it with the dedicated square bit screw TBA-45 (6 pieces). For tightening the dedicated square bit screw TBA-45, please use the separately sold No. 3 square bit. 【Features】 ■ N value 0.2 or less ■ Material: JIS G 3302 (hot-dip galvanized steel sheet and steel strip) SGHC or SGCC ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Convenient for joining columns in the middle passage where horizontal members intersect in a cross shape ■ Equivalent certified product to Z-mark hardware (Kasuagai C) *For more details, please refer to the PDF materials or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column Joint Fitting "Small Corner II"

Column Joint Fitting "Small Corner II"

Improved construction efficiency compared to CP-L! This is a column connection hardware that makes it easy to construct vertical walls.

"Small Corner II" is used for the connection of columns and horizontal members. It has short-term standard joint strength, and since it only requires two screws on the horizontal member side and two on the column side with a 43mm screw, it improves construction efficiency compared to CP-L. This product has passed joint performance testing by House Plus Inspection Co., Ltd. 【Features】 ■ N-value of 0.66 or less ■ Improved construction efficiency compared to CP-L ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Easy installation of exterior walls as it is mounted on top of the horizontal member ■ Compact size with a width of 28mm and height of 47mm, allowing for easy installation ■ Material: JIS G 3302 (hot-dip galvanized steel sheet and steel strip) SGHC or SGCC *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Small Corner II for floor plywood specification"

Column connection hardware "Small Corner II for floor plywood specification"

Compatible with thicknesses below 30mm! Installation efficiency with 4 screws. Can be installed over floor plywood.

The "Small Corner II Floor Plywood Specification" can be installed over the floor plywood without cutting it. By simply driving two 75mm screws into the horizontal member and two 43mm screws into the post side, construction efficiency can be improved. 【Features】 ■ N-value 0.81 or less ■ Short-term standard joint strength 4.3kN ■ Compatible with floor plywood up to 30mm thick ■ Product tested for joint performance by House Plus Inspection Co., Ltd. *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Hook Corner"

Column connection hardware "Hook Corner"

Can be installed with 4 screws! Quick installation and easy work at heights.

The "Hook Corner" is a column joint hardware that corresponds to the announcement symbol (ha) with fewer screws and allows for speedy installation of hardware. It can be installed with just four screws, enhancing work efficiency. With dimensions of 30mm in width, 50mm in height, and a thickness of 1.6mm, the product is compact and can be installed neatly. By fixing the product to the column with temporary clips, working at heights becomes easier. 【Features】 ■ Compatible with corner columns ■ N value of 1.2 or less ■ Material: JIS G 3302 (hot-dip galvanized steel sheet) structural SGH490 ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Performance test (mid-column type) short-term standard joint strength: 6.7kN ■ Performance test (corner column type) short-term standard joint strength: 6.4kN *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Flat Plate SD"

Column connection hardware "Flat Plate SD"

High corrosion resistance and high tensile strength with a thickness of 0.6mm! It has strength equal to or greater than Yamagata Plate VP.

The "Flat Plate SD" has a thickness of 0.6mm (compared to the conventional corner hardware which has a thickness of 2.3mm), allowing structural plywood and similar materials to be directly attached over the hardware. The screw-in area has an embossed finish, so the screw heads do not protrude. It uses "Super Dima R," which has excellent corrosion resistance. It has a load capacity equal to or greater than that of the Z-shaped plate VP. 【Features】 ■ N value of 1.1 or less ■ High corrosion resistance and high tensile strength at 0.6mm thickness ■ Short-term allowable tensile strength of 5.9kN ■ Performance certified by the Japan Home and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Flat Plate Slim"

Column connection hardware "Flat Plate Slim"

The construction efficiency is improved with a minimum specification using 5 screws! For joining columns and horizontal members, etc.

The "Flat Plate Slim" is used for the connection of columns and horizontal members. By limiting the number of screws used to five, construction efficiency has improved. It uses "Super Dyma," which has excellent corrosion resistance and does not contain hexavalent chromium compounds. This product has passed quality performance certification tests by the Japan Building Materials Testing Center. 【Features】 ■ N-value 1.1 or less ■ Short-term allowable tensile strength 6.1 kN ■ Material: NSDC570 manufactured by Nippon Steel Corporation ■ Embossed processing on the screw insertion part ■ Surface treatment: Alloy-coated steel sheet "Super Dyma" ZQNK18 chrome-free *For more details, please refer to the PDF materials or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Flat Plate Slim Plywood Specification"

Column connection hardware "Flat Plate Slim Plywood Specification"

Introducing column connection hardware for plywood specifications for structural plywood with a thickness of 12mm or less!

The "Flat Plate Slim Plywood Specification" is used for the connection of columns and horizontal members. It can be installed over structural plywood with a thickness of 12mm or less. Please secure 2 dedicated corner bit screws TB-55 on the column side and 3 on the horizontal member side. This product has passed joint performance tests conducted by House Plus Inspection Co., Ltd. 【Features】 ■ Plywood specification ■ N value of 1.0 or less ■ High corrosion resistance and high tensile strength, 0.6mm thickness ■ Short-term standard joint load capacity of 5.7kN ■ Material: NSDC570, manufactured by Nippon Steel Corporation ■ Surface treatment: Alloy-coated steel sheet "Super Dyma," ZQNK18 chrome-free *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.